if (typeof(HELP_BOX) != 'undefined') {HELP_BOX.add_definition('SAS-TEC', 'This protection has the highest CE rating available. The intelligent protection armour is constructed from smart molecules: in case of an impact the armour will rapidly freeze and harden, absorbing the shock and distributing it over a large area to reduce the risk of fractures. The soft exterior of the armour offers a great deal of comfort and mobility.');HELP_BOX.add_definition('Pro Life', 'This CE approved armour is designed in Italy; it is constructed from elastomeres, which contain micro pores of trapped air. This trapped air considerably absorbs the impact of a shock and distributes the deriving forces.');HELP_BOX.add_definition('Knox', 'CE approved protection armour designed in the UK. Combining rubber foam interior with a hard shell polyurethane exterior, KNOX® is used in a broad range of REV’IT! products including our lifestyle apparel, and offers a highly effective means of protection. KNOX® amour is extremely durable, lightweight and flexible.');HELP_BOX.add_definition('Temperfoam', 'Self-contouring foam that is not CE approved but still holds a great deal of impact resistant properties, this product is used in areas as the hips where mobility is a must.');HELP_BOX.add_definition('SuperFabric', 'SuperFabric® technology is an advanced process that transforms ordinary fabrics into unique, highly protective materials. Protective shields are applied close to each other but remain separate to allow maximum flexibility. Those micro guard plates provide an additional layer of protection without adding weight and will help resist abrasion to underlying fabrics. SuperFabric® is 5 times more abrasion resistant than leather with only half the weight. This high tech material is used in the CAYENNE PRO & TURBINE jackets and pants as well as in the GT CORSE & TEMPEST gloves.');HELP_BOX.add_definition('Direct VSC System', 'This 100% waterproof ventilation system directly leads through the integrated membrane to allow fresh air to flow into the garment.');HELP_BOX.add_definition('Thermolite Plus', 'Thermolite® Plus (Dupont) is made from 80% recyclable polyester. It is a high quality, medium loft thermal lining which offers warmth and comfort for the motorcyclist. The innovative mix of fibers retains body heat by trapping air. The material is soft and supple, ensuring maximum freedom of movement and comfort.');HELP_BOX.add_definition('Thermolite Active ', 'Thermolite® Active (Dupont) provides lightweight warmth at minimal thickness. A patented process provides outstanding durability, especially when damp, which makes it perfectly suitable for high activity sports apparel.');HELP_BOX.add_definition('Scholler PCM', 'PCM is an active temperature controlling material; when the outside temperatures drops, the liquid PCM cells solidify and gradually release heat, when the temperature rises the cells change into a fluid again and absorb excess body heat. PCM offers the best protection in even the coldest weather conditions by keeping the body at a constant comfortable temperature.');HELP_BOX.add_definition('Hydratex', 'A waterproof layer is laminated onto a carrier to construct the REV’IT! Hydratex® membrane. The carrier in turn protects the membrane against rub and tear damage. The seams of the membrane are taped to ensure waterproofing. The REV’IT! Hydratex® membrane is used in garments that demand a high level of all-weather protection.');HELP_BOX.add_definition('Hydralite Pro', 'The inventive REV’IT! Hydralite® Pro membrane consists of three functional layers which are laminated together to become one strong layer of all-weather protection. A waterproof membrane is laminated directly onto the inside of the outer shell. A protective lining laminated on the inside of the membrane prevents run and tear damage. The highly functional REV’IT! Hydralite® Pro membrane reacts to changing temperatures and activities and is used in the construction REV’IT! collection and offers the best comfort and all-weather protection available.');HELP_BOX.add_definition('Hydralining', 'This waterproof coating is integrated at the inside of the garment. The seams are taped to ensure that the garment is waterproof. The REV’IT! Hydralining® membrane is used in the construction of products that demand a basic level of all-weather protection.');HELP_BOX.add_definition('Hydralite', 'REV’IT! Hydralite® is a waterproof coating applied to all rain specific gear. This coating adds an extra level of waterproofing to already waterproof materials.');HELP_BOX.add_definition('WindBarrier', 'The REV’IT! WindBarrier® membrane is laminated between two separate layers of fabric: a stretchable outer layer and a soft fleece inside. This combination forms a blockage against wind, and helps repel water. Stopping the wind and rain helps prevent hypothermia and improves the level of comfort and warmth.');HELP_BOX.add_definition('Schoeller NanoSphere', 'This revolutionary finish makes it impossible for dirt or water to affix to material, resulting in a garment that will stay clean and dry. It is because of the innovative new process that REV’IT! is able to produce garments in a variety of bright colors, which enhances the overall visibility and safety of the rider.');HELP_BOX.add_definition('Piston', 'Fabric for sports clothing composed of high-tenacity nylon with twisted super-matte thread insert. Good resistance to wear and tear; discreet resistance to UV radiation. Provided with polyurethane resin coating Protector treatment that gives the fabric excellent resistance to penetration by water and oil, and the material does not require ironing for the restoration of such properties but merely sufficient air drying after washing. This treatment was developed thanks to nanotechnology applied to textile finishing.');HELP_BOX.add_definition('3D-Bubble Liner', 'Born and tested to the needs of racers like Valentino Rossi, this particular three-dimensional liner permits the creation of an air chamber between the inside and outside of the suit in order to provide an ideal microclimate during both summer and winter. It is no longer necessary to insert or remove the old thermal liner that compromised perfect fit and size when the weather changes. The 3D Bubble liner ensures the same fit all year round');HELP_BOX.add_definition('D-Dry', 'Thanks to its special structure, the particular hydrophilic membrane applied to D-Dry fabric ensures a perfect waterproof seal while permitting remarkable breathability that promotes the elimination of the moisture produced by the body. This technical material was developed by D-Tec® to ensure the maximum comfort under different weather conditions. D-Dry® technology guarantees garments a level of breathability sufficient to ensure the elimination of the moisture produced by the body even during under the most exerting riding conditions. The particular D-Dry® structure ensures perfect seal against penetration by rain and wind under adverse weather conditions and high riding speeds. Laboratory tests show water penetration resistance values equal to over 10,000 mm of water column height.');HELP_BOX.add_definition('D-Skin leather', 'D-Skin leather, the fruit of long testing and collaboration with foreign laboratories, offers excellent results in terms of protection, comfort, and fit. The characteristics of new D-Skin leather also guarantee a significant increase in mechanical performance compared to traditional cowhide and reach values of over 60% in tensile strength and 80% tear resistance. Particular wax and silicone treatment gives exceptional softness.');HELP_BOX.add_definition('D-Stone', 'Fabric for sports clothing made in high-tenacity twisted nylon with elasticated inserts faced with nylon. Its armoured weave offers exceptional comfort characterized by high resistance to abrasion, breaking, and tear with a performance comparable to leather. The S1 version S1 (without resin coating) features Protector treatment. The S1P1 version, in addition to Protector treatment, also features breathable, windproof polyurethane resin coating. Protector treatment grants the fabric excellent water and oil repellence, and the material does not require ironing to re-acquire its properties because only air drying is necessary after washing. This treatment was developed thanks to nanotechnology applied to textile finishing.');HELP_BOX.add_definition('Texas fabric', 'Texas is a fabric for sports clothing made in high-tenacity twisted Polyamide (PA 90%), Elastomer (EA 5%), and Polyurethane resin (5%). Because it is a twisted thread, it offers excellent resistance to abrasion and breaking along with excellent comfort, thanks to elastomeric inserts. The particular finishing grants optimum water repellence and permits elevated water/oil repellence even after washing without requiring ironing. This treatment was developed thanks to nanotechnology applied to textile finishing. The polyurethane resin coating provided is also breathable.');}